Alien Eye Cost Overview

Please do not forget to select a shipping option for any order. No item with be shipped without the appropriate shipping being selected. If you are unsure write me first. Minimum order is 10 Euro. Before ordering write me first.

For a kit click here

Other European Suppliers

US Supplier

Edison Opto EL16-51W3
(10º beam angle)
~~6800-7200º K~~ , ~~6650-7000ºK~~, 6200-6800ºK

Edison Opto has discontinuued the 5W.

I have a limited supply left. see above

The LED Light .com $31.50

DC Barrel connector

Conrad 732770 1.19 €

Reichelt HK 21 0,24€

Available from me. see above

Action Electronics # 257B
2.1mm x 5.5mm DC Power Jack $1.62

Click on picture for dimensions

mini rocker switch

Conrad 700039 2.23 €

Available from me. see above

Action Electronics
Rocker Switch 30-872

90º power connector 5.5 x 2.1 mm

Straight power connector

Conrad 734197 - 62 1.46 €

Conrad 710344-62 1.07 €

Available from me. see above

Action Electronics PH-TC210B $1.75

Power cable splitter 5.5x2.1 mm x 180 mm

Run two lamps with one battery pack.

Available from me.

1 x battery holder for 10
rechargeable AA batteries

Conrad 615617-62 2.25 €
9V clip tabs.

Reichelt 10xUM3QDK 0.72€
9V clip tabs.

Available from me. see above

Action Electronics BH3103
(solder tabs) $1.85

CLIPHQ9V-T.jpg (4770 bytes)

Conrad 490660-62 0.29 €

Reichelt CLIP HQ9V-T 0,29 € (best choice)

Available from me. see above

Action Electronics BC120
9v battery Clip $0.49
(not needed for Solder Tab types)

For Voltcraft Multi Charger
220V 50Hz

733946_BB_00_FB_EPS.jpg (6354 bytes)
Panel Mount Panel Jack
for adapter to multi charger

Conrad 232622-32 14.95 €

Available from me. see above with modified connector for 20€

Conrad 733948-62 0.91 €

Reichelt HEBl 21 0,20 €

Powerstrea110V 60 Hz

Fixed for 10 Cell recharging. 1000 ma
PST-5830-10-3-16H $9.99

Powerstream

6-10 cell NiMh recharger. $23.70

Action Electronics 2112B
2.1mm x 5.5mm DC Power Jack $2.45

Spacer
533-8730 for
H31/H32 clamps and helmet mount

cateye_clamp_sm.jpg (3087 bytes)

Handlebar Clamp H32
22-26 mm bars
H31 for 28-32 mm.

helmet_mount.jpg (2350 bytes)
Helmet Mount
Model: 534-1831

Available from me. see above

Order from your bike shop, or from me

Cateye.com does not ship outside of the USA.

Cateye.com Spacer $2.00

Cateye.com clamp H32 $2.75

Cateye.com Helmet mount $8.00

Hama 40H Camera bag with riveted
25 mmx 360 mm Velcro strap

Hama Syscase II 40H Camera bag (no strap)
5.00-6.99€ Real, Mediamarkt, Promarkt

10 € bag and strap write me.

2.50 € Velcro Strap write me.

M4x12 threaded hex

M4x12 mm Distanzhülse

Reichelt 0, 15€

Available from me. see above

** This cable has thicker 21 AWG wire and is more difficult to solder to the 9V clip. Before soldering to 9V battery clip, cut away 1/3 the wire strands to reduce the heat required to solder.

DSC04561.jpg (5321 bytes)

1x M4 x 16 mm Panhead screw, 3x M4 nuts, 2x washer <.25 € (Hornbach)

4 x 10mm 3/32" long shrink tubing. (7 pieces if you make a adapter for the charger) 10x200mm 2.62€

tronic.JPG (14559 bytes) AA Ni Mh rechargeable batteries seasonally on sale at Aldi 2.59 € for 4x AA batteries (2300- 2500 mah) Total cost for 12 batteries: 7.77 €.

wet_sang_paper.jpg (2000 bytes) Wet sand paper in 300, 600, 800, 1000 and/or 1200 grit for final finishing.

Hama Camera Bag Syscase II 40H 60x30x95 mm, Syscase II 30G 60x25x90mm 5,00-6,99 € The 30G is very tight for the 10x battery pack, but it works

Velstrap 25 mm x 360mm

Housing Material Options:

fimo_soft.jpg (3525 bytes) <22 grams Fimo soft per lamp. 2.38 € for a 56 gram package (smallest size). Sources: Hela Baumarkt, Ebay

Fimo can be mixed to form many different colors. Click here for all the FIMO Soft colors.

When using Fimo alone, it must be thoroughly mixed with glass fibers for reinforcement. Otherwise the Fimo is not strong enough and can crack.

221175_glass_fibers.jpg (8768 bytes) .Glass fibers (ground 0,2 mm) 4-6 ml (4-6 grams) per 28 grams of Fimo. 200 grams Conrad 7.70 €

write me if you need glass fibers.

Lamp weighs: 120 grams

milliput-black.jpg (6334 bytes) Milliput black two-part epoxy putty. 2 hour cure time. Ebay 6,91€ including shipping

Can be smoothed before curing with water. One package can make three lamps. No painting needed if black is desired. Not as easy to work with as Fimo with glass fibers or the hybrid design.

Lamp weighs: 124 grams

886555_BB_00_FB_EPS.jpg (8885 bytes) Two Part Epoxy Putty Can be used for the Hybrid design,
(about 10 grams required).
Conrad 886522 56 gram 3,99 €
Conrad 886555 114 gram 4,99 €

repair-all.jpg (11984 bytes) uhu-lamp.jpg (11186 bytes) U-hu Repair All two epoxy quick cure (5-10 minutes) 7.50€

Not recommend for use as the outer shell for the lamp.

Disadvantages: cures too fast, color sucks. Need primer paint to make paint stick, expensive material.

Lamp weighs: 140 grams.